Specifications
Outer body material: zinc alloy
Standard color/finish: chrome
For glass thickness: ≤6 mm
Key change: 400 different key changes possible.
Operation: 180° at anticlockwise direction to unlatch.
Features
Ships with body and cylinder assembled for fast and easy installation.
Plastic gasket on front surface fully cushion pull or push to avoid glass damage.
Key removable in locked or unlocked position.
Easy installation.
2 keys included.
ABOUT US
Founded in 1983, it is a professional manufacturer and exporter located in Huizhou, Guangdong, with convenient transportation. The factory has more than 40 years of experience in furniture lock production, pays close attention to market development and cultivation, and focuses on developing, designing and producing high-quality products.
Quality Control: The professional quality inspection team will follow up on incoming material inspection, finished product inspection, finished product inspection and pre-shipment inspection to ensure that customers are provided with high-quality products.
FAQ
1.How do swing glass door locks work?
Most swing glass door locks are simple to operate, with keys, handles or electronic devices (such as smart locks) controlling the opening and closing of the door. For example, a lock with a privacy handle can be locked by turning the privacy handle after closing the door, and unlocked by turning it in the opposite direction.
Smart locks can be remotely controlled and unlocked through mobile phone applications, password input or biometrics.
2.How do swing glass door locks be maintained?
Clean the lock regularly, wipe it with a soft cloth to remove dust and dirt, and prevent debris from accumulating inside the lock and affecting normal operation.
Apply silicone-based lubricant to the moving parts of the lock regularly to prevent corrosion and ensure smooth operation.
Check the lock regularly for signs of wear or damage. If abnormalities are found, they should be repaired in time to avoid safety hazards.
3.What are the common faults of swing glass door locks?
If the lock is stuck or cannot be opened and closed normally, it may be caused by foreign objects in the lock cylinder or wear of the lock parts. There is a problem with the alignment of the lock and the door frame. This may be due to house settlement, temperature changes or deformation of the door frame caused by long-term use. The key is difficult to insert or turn. It may be that the key is worn or there is rust or dirt inside the lock cylinder.
4.How to solve the problem of swing glass door lock failure?
In the case of a stuck lock, you can first try to clean the foreign objects inside the lock cylinder. If it does not work, you need to contact a professional locksmith for repair. The door lock alignment problem can be solved by adjusting the position of the door frame or lock. In serious cases, you need to ask a professional to calibrate it. For key problems, you can re-make a new key. If there is serious rust inside the lock cylinder, you need to replace the lock cylinder.
5.What should I do if the store door lock cannot close properly?
It may be that the weather strip is too thick to prevent the door from closing completely. The appropriate size and type of weather strip needs to be installed.
The lock or exit device cannot retract the deadbolt and/or bolt. It may be a lock failure, improper installation, building settlement or door deformation. It is necessary to test the lock hardware operation and check the levelness of the equipment, the opening condition and whether the door is deformed.
Hinge screws are loose or the door frame is no longer firmly attached. Check that the mounting screws are tight, the hinges are functioning properly, and lubricate the hinges.
Building settlement can also cause door closing problems. This problem is not easy to solve. Continue to observe and start with the cheapest repair.
The deadbolt or bolt cannot enter the strike plate opening. It can be adjusted.
Whether the door frame is vertical is also critical. The lack of verticality may be caused by building settlement and other reasons. It will affect the opening and locking of the door. Sometimes the strike plate opening on the door frame can be modified to accommodate the movement of the deadbolt.
6. How often do storefront door locks need to be replaced?
When the lock shows signs of wear, there is a large turnover of employees, and upgrades to a more secure system, the lock should be replaced.
7.How to maintain storefront door locks?
Clean the lock mechanism regularly and wipe the lock with a damp cloth to prevent dust accumulation; apply lubricant to the keyhole and internal mechanism regularly; check the lock regularly for signs of wear to avoid affecting security.
